|
|
$449.00
Genesys Virtex®-5 FPGA Development Kit
- Xilinx Virtex®-5 LX50T FPGA
- Intended for use with ISE or EDK
- USB2 ports providing programming, data transfer, and application hosting
- 256Mbyte DDR2, 32MB Numonyx StrataFlash, Gigabit Ethernet PHY, multiple USB2 ports, HDMI video, AC-97 audio
$99.00
Nexys2 FPGA Board
- Xilinx Spartan-3E FPGA (500K or 1200K gates)
- Intended for use with ISE, Webpack, or EDK
- Digilent USB2 port providing board power, programming, and data transfers
- 16MB Micron CellularRAM, 4MB Numonyx StrataFlash, VGA, RS-232, high-speed expansion connector
$59.00
Basys2 FPGA Board
- Xilinx Spartan 3E FPGA (100K or 250K gates)
- Intended for use with ISE or Webpack
- Digilent USB2 port providing board power, programming, and data transfers
- VGA & PS/2 connectors
$149.00
Spartan 3E Starter Board
- Xilinx Spartan 3E FPGA (500K gates)
- Intended for use with ISE, Webpack, or EDK
- Xilinx USB circuit for programming
- 32MB Micron DDR SDRAM, 16MB Numonyx StrataFlash, VGA, PS/2, RS-232, 10/100 Ethernet
Spartan 3E-1600 Development Board
- Xilinx XC3S1600 FPGA (1600K gates)
- Intended for use with ISE, Webpack, or EDK
- Xilinx USB circuit for programming
- 256Mbit Micron DDR SDRAM, 128Mbit Intel StrataFlash, ST Microelectronics M25P16 16Mbit Serial Flash, VGA, PS/2, RS-232, 10/100 Ethernet
$399.00
XUP Virtex-II Pro Development System
- Xilinx Virtex-II Pro (30,816 Logic Cells)
- Intended for use with EDK
- Xilinx USB circuit for programming
- DDR SDRAM DIMM socket, Compact Flash socket, 10/100 ethernet, VGA, Audio Codec, High and Low Speed expansion connectors
$750.00
Virtex-5 OpenSPARC Evaluation Platform
- Xilinx Virtex-5 FPGA (17,280 Virtex-5 Slices)
- Intended for use with ISE or EDK
- Ships with XUP USB-JTAG Programming Cable
- Large DDR array, Gbit ethernet, USB host, audio / video CODECs
$499.00
NetFPGA
- Xilinx Virtex-II Pro (53,136 Logic Cells)
- Intended for use with EDK
- Interfaces to standard Gigabit Ethernet using Cat5E or Cat6 copper network cables
- Wire-speed processing on all ports at all time using FPGA logic
Spartan-3 Starter Board
- Xilinx Spartan-3 FPGA (200K or 1000K Gates)
- Intended for use with ISE or Webpack
- Works with Digilent’s JTAG3, JTAG USB, and JTAG USB Full Speed cables, as well as P4 & MultiPRO cables from Xilinx
- 1MB ISSI SRAM, VGA, PS/2, RS-232, three 40-pin expansion connectors
Digilent CMOD
- Xilinx CoolRunner II CPLD (64 Macrocells)
- Intended for use with ISE or Webpack
- Programmable via Digilent parallel or USB JTAG cable
- Convenient & standard 40-pin DIP footprint
|
|
