|
I/O Explorer USB
- Atmel AT90USB646 & ATmega165P microcontrollers
- Intended for use as a USB I/O experimentation tool
- Programmable via USB2 cable and Digilent Adept SDK & runtime
- Connectors: USB Port, 5 x 12-pin Pmod™ headers, 1 x 6-pin Pmod™ header, 8 x R/C servo connectors, SPI master port, UART interface port
Voltage Regulator Module
- 6A synchronous step down switcher
- Selectable 5V or 3.3V output voltage
- Input voltage range of 5-15V
- 479kHz internal switching frequency
- Switching synchronization to an external clock
$449.00
Genesys Virtex®-5 FPGA Development Kit
- Xilinx Virtex®-5 LX50T FPGA
- Intended for use with ISE or EDK
- USB2 ports providing programming, data transfer, and application hosting
- 256Mbyte DDR2, 32MB Numonyx StrataFlash, Gigabit Ethernet PHY, multiple USB2 ports, HDMI video, AC-97 audio
PmodNIC - Network Interface Controller
- 10 Mb/s IEEE 802.3 compatible Ethernet controller
- SPI interface
- 10BASE-T MAC/PHY
- Small size (1.65" x 0.80")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodRF1 - Wireless Radio Transciever
- Operates in selected frequency ranges within the North American ISM band, the European SRD band, and the Chinese WPAN band
- Features a standard SMA connector for use with a wide range of antennas (2" antenna included)
- Small size (1.5" x 0.75")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
Cerebot 32MX4
- Microchip® PIC32 32-bit MIPS processor (PIC32MX460F512L)
- Intended for use with MPLAB
- Program using MPLAB via onboard programming circuit
- Connectors: eight 12-pin Pmod, one 6-pin Pmod, eight R/C servo, two SPI ports, two I2C ports
$146.99
CY3267 PowerPSoC Lighting Evaluation Kit
- Integrated power electronics to support LED drive and control in a single chip
- Includes an LED daughter board which uses a 10W 4-channel RGBA LED to serve as a load to the main board
- PSoC core enables tunable white light with CRI and CCT control as well as color mixing
- Internal FETs, current sense amplifiers and hysteretic controllers
Digital Design
- Your choice of either VHDL or Verilog version
- A full textbook designed to guide newcomers from the basics all the way through to advanced concepts
- Uses 75+ examples to teach advanced digital design
- Designed around the Digilent Nexys2 and Basys boards
- Written by professors Richard E. Haskell & Darrin M. Hanna
- Price shown is for the book only. Add to cart to bundle with an FPGA board for a discount
JTAG-USB Full Speed Module
- Improved low-cost JTAG configuration & SPI communication solution
- Connects to a standard 6-pin JTAG or SPI programming header
- Can be used with Digilent Adept & AVR Device Programmer software
- Can program devices that have a JTAG voltage of 1.8V or greater
- Requires Adept 2.0 or later for operation
|
